Accessories & Options

For successful implementation of the Pole Mounted Occupancy sensor, a minimum of one hand-held remote is required

Tamper Proof Kit for stainless steel latches; includes 4 tamper proof screws and bit

Tamper Proof Kit includes 4 tamper proof screws and bit

16 Wire Guard for Prismatic & Acrylic Reflectors

16 Wire Guard for Aluminum Reflector

For use with 1×2 light engines: 32L. Must order end caps separately. Not compatible with 347V adaptor kits or EJBCR-5PK.

For use with 1×4 light engines: 22L, 40L, 40LHE and 50L. Must order end caps separately. Not compatible with 347V adaptor kits or EJBCR-5PK.

Optional accessory for continuous row installations

Required for all SMK installations

The SMK-CR surface mount kit is designed to convert Cree CR Series troffers into surface mount or suspended luminaires. It features a powder-coated white finish to compliment a variety of interior designs.

The SC6-WM cylindrical wall mount housing is designed to accommodate all Cree 277V and GU24-based six-inch downlights in a variety of architectural applications.

The SC6-CM cylindrical cord mount housing is designed to accommodate all Cree 277V and GU24-based six-inch downlights in a variety of architectural applications. It supports a maximum suspension distance of 7 ft. to the top of the fixture and may be field modified for shorter distance.

The SC6 cylindrical surface mount housing is designed to accommodate all Cree 277V and GU24-based six-inch downlights in a variety of architectural applications. It is rated for use with luminaires that consume low energy optimizing energy density calculations for easier energy code compliance and LEED certification. The SC6 housing also features a subtle, unobtrusive design that integrates cleanly into the interior space.

5′ safety cable

10′ safety cable

The RR6 recessed housing is designed to accommodate all Cree 120V six-inch downlights in retrofit applications. It is rated for use with luminaires that consume low energy optimizing energy density calculations for easier energy code compliance and LEED certification. The RR6 housing is IC rated, airtight, inherently protected and, when ordered with a GU24 socket, California Title-24 compliant.

The RC6 recessed housing is designed to accommodate all Cree 120V six-inch downlights in new construction applications. It is rated for use with luminaires that consume low energy optimizing energy density calculations for easier energy code compliance and LEED certification. The RC6 housing is IC rated, airtight, inherently protected and, when ordered with a GU24 socket, California Title-24 compliant.

C-Channel Hanger Bars

T-Bar Clips compatible with the RBH24C-1 hanger bars

3) #12AWG 102 wires for Line (black), Neutral (white), Ground (green)

(2) #18AWG 54 wires for 0-10V dimming (purple, gray)

Sloped Ceiling Adapter

KR Series Trim Ring

The H6 recessed architectural housing is designed to accommodate all Cree 277V and GU24-based six-inch downlights in new construction applications. It is rated for use with luminaires that consume low energy optimizing energy density calculations for easier energy code compliance and LEED certification. The H6 housing is IC rated, airtight, inherently protected and, when ordered with a GU24 socket, California Title-24 compliant.

Expanded size junction box for through wiring. Not compatible with surface mount kits.

Emergency Backup – 1400 lumens

16 Clear Prismatic Drop Lens for Prismatic & Acrylic Reflectors

The DGA lay-in accessory enables Cree CR Series troffers to easily install into plaster and sheet rock ceilings. It may be installed into any hard ceiling to create a simple t-bar style opening.

Flat black diffuse finish reflector

Wheat diffuse finish reflector

Black diffuse finish reflector

Silver diffuse finish reflector

CT6 trim accessories are designed for easy snap-in attachment to CR6 downlights, providing a clean aperture appearance that decreases high angle brightness with minimal effect on lumen output. With a variety of colored finishes to choose from, the CT6 is a spec-grade solution that complements a variety of interior designs.

For use with S controls. Not compatible with surface mount kits.

For use with 10V controls. Not compatible with surface mount kits.

16 Clear Cone Bottom Lens for Prismatic & Acrylic Reflectors

Matching Cree face plate, 3-gang, white

Matching Cree face plate, 2-gang, white