Accessories & Options

Includes large bracket for mounting to 2 (51mm) IP, 2.375 (60mm) O.D. tenon, small bracket for mounting to 1.25 (32mm) IP, 1.66 (42mm) O.D. tenon and mounting bolts. NOTE: Line art on CI379X15R1

For use with 70 to 90 LED luminaires. Designed to control backlight – put the light where you want it and not where you don’t.

For use with 40 to 60 LED luminaires. Designed to control backlight – put the light where you want it and not where you don’t.

For use with 20 to 30 LED luminaires. Designed to control backlight – put the light where you want it and not where you don’t.

For use with 100 to 120 LED luminaires. Designed to control backlight – put the light where you want it and not where you don’t.

For use with HC and PD mounts only. Designed to prevent birds from landing or setting up a nest on the luminaire.

Used for replacement of existing bollards with a bolt hole circle of 5.75″ (146mm), white finish

Used for replacement of existing bollards with a bolt hole circle of 5.75″ (146mm), silver finish

Used for replacement of existing bollards; platinum finish

Used for replacement of existing bollards with a bolt hole circle of 5.75″ (146mm), bronze finish

Used for replacement of existing bollards with a bolt hole circle of 5.75″ (146mm), black finish

Direct Arm Pole Adaptor Bracket for use with Horizontal Tenon Mount

Designed to prevent birds from landing or setting up a nest on the luminaire.

Designed to control backlight – put the light where you want it and not where you don’t.

Designed to prevent birds from landing or setting up a nest on the luminaire.

Designed to control backlight – put the light where you want it and not where you don’t.

For successful implementation of the Pole Mounted Occupancy sensor, a minimum of one hand-held remote is required

Used when installing pendant mount luminaires

15″ (381mm); Pendant height. Includes two conduit fittings and 3/4-14 NPT pipe threaded on two ends. Height from ceiling surface to bottom of fixture depends on the product; additional accessories or surface boxes will add to overall height.

11″ (279mm); Pendant height. Includes two conduit fittings and 3/4-14 NPT pipe threaded on two ends. Height from ceiling surface to bottom of fixture depends on the product; additional accessories or surface boxes will add to overall height.

5″ (127mm); Pendant height. Includes two conduit fittings and 3/4-14 NPT pipe threaded on two ends. Height from ceiling surface to bottom of fixture depends on the product; additional accessories or surface boxes will add to overall height.

For 0-13 degree sloped ceilings. Used when mounting pendant mounted luminaires.

30″ (762mm) Long – Mounting bars used to help secure the luminaire to wood trusses

22″ (559mm) Long – Mounting bars used to help secure the luminaire to wood trusses

14″ (356mm) Long – Mounting bars used to help secure the luminaire to wood trusses

Kit Includes four brackets

347V – For use with Hook & Cord Mounts

277V – For use with Hook & Cord Mounts

277V – For use with Hook & Cord Mounts

208/240V – For use with Hook & Cord Mounts

208/240V – For use with Hook & Cord Mounts

120V – For use with Hook & Cord Mounts

120V – For use with Hook & Cord Mounts

347V – For use with Hook & Cord Mounts

Spans two 16 deck panels. Metal plate used when replacing surface mounted HID luminaires. Painted Colorfast DeltaGuard^® white. Must be field cut to match luminaire.

Spans two 12 deck panels. Metal plate used when replacing surface mounted HID luminaires. Painted Colorfast DeltaGuard^® white. Must be field cut to match luminaire.

For use with 90 LED count. For use with shallow canopies that are less than 2-1/2 in height when upgrading recessed HID luminaires in existing open canopies.

For use with 90 LED count. For use with canopies that are greater than 2-1/2 in height when upgrading recessed HID luminaires in existing open canopies.

For use with 90 LED count. Beauty Plate with backer plate used when upgrading existing HID fixtures with a 9-inch or 10-12-inch holes; 16-inch deck.

For use with 90 LED count. Beauty Plate with backer plate used when upgrading existing HID fixtures with a 9-inch or 10-12-inch holes; 12-inch deck.

For use with 90 LED count. Plastic Kit without backer plate used with canopies that have maximum of 7 diameter cut hole.

For use with 60 LED count. For use with shallow canopies that are less than 2-1/2 in height when upgrading recessed HID luminaires in existing open canopies.

For use with 60 LED count. For use with canopies that are greater than 2-1/2 in height when upgrading recessed HID luminaires in existing open canopies.

For use with 60 LED count. Beauty Plate with backer plate used when upgrading existing HID fixtures with a 9-inch or 10-12-inch holes; 16-inch deck.

For use with 60 LED count. Beauty Plate with backer plate used when upgrading existing HID fixtures with a 9-inch or 10-12-inch holes; 12-inch deck.

For use with 60 LED count. Plastic Kit without backer plate used with canopies that have maximum of 7 diameter cut hole.

For use with 30 LED count. For use with shallow canopies that are less than 2-1/2 in height when upgrading recessed HID luminaires in existing open canopies.

For use with 30 LED count. For use with canopies that are greater than 2-1/2 in height when upgrading recessed HID luminaires in existing open canopies.

For use with 30 LED count. Beauty Plate with backer plate used when upgrading existing HID fixtures with a maximum of 12 diameter or 12 x 12 cut hole; 16-inch deck.

For use with 30 LED count. Beauty Plate with backer plate used when upgrading existing HID fixtures with a maximum of 10 diameter or 10 x 10 cut hole; 12-inch deck.

For use with 30 LED count. Plastic Kit without backer plate used with canopies that have maximum of 7 diameter cut hole.

For use when direct mounting luminaires to solid surfaces.

22 (559mm); Pendant height from ceiling surface to bottom of fixture; additional accessories or surface boxes will add to overall height

18 (457mm); Pendant height from ceiling surface to bottom of fixture; additional accessories or surface boxes will add to overall height

12 (305mm); Pendant height from ceiling surface to bottom of fixture; additional accessories or surface boxes will add to overall height

for use with LSI Richmond or Whiteway Civic luminaires in existing recessed (rectangular) canopies. 23.00″ L x 13.00″ W, 18 ga. Steel

for use with Elsco Merrit luminaires in existing 2×2 box canopies. 18.06″ square, 18 ga. Steel

for use with Whiteway Riviera or Rig-A-Lite luminaires in existing 2×2 box canopies. 20.60″ square, 18 ga. Steel

for use with LSI Dakota or Masters luminaires in existing 2×2 box canopies. 22.50″ square, 18 ga. Steel

for use with Elsco Franciscan luminaires in existing 2×2 box canopies. 22.06″ square, 18 ga. steel

for use with Jet-Philips luminaires in existing 2×2 box canopies. 21.60″ square, 18 ga. steel

6.0″ (152mm) H x 3/4″ (19mm) NPT Stem. Watertight. Rated for feed through 8 (4 in, 4 out) #12 AWC conductors

Beauty Plate only (26-inch square). Used to enhance aesthetic appeal. 18 ga. Steel.

Beauty plate (18 ga. steel) w/16″ (406mm) Backer Plate (16 ga. steel). For use in canopies where deck opening is larger than what is required for mounting the CPY250 luminaire. Maximum deck opening 12″ x 15″ (305mm x 375mm).

Beauty plate (18 ga. steel) w/16″ (406mm) Backer Plate (16 ga. steel). For use in canopies where deck opening is larger than what is required for mounting the CPY250 luminaire. Maximum deck opening 10.75″ x 15″ (183mm x 375mm).

Designed to prevent birds from landing or setting up a nest on the luminaire.

Designed to prevent birds from landing or setting up a nest on the luminaire.

For use with LEDway housings. Designed to prevent birds from landing or setting up a nest on the luminaire.

For use with 70 to 90 LED light engines. Designed to prevent birds from landing or setting up a nest on the luminaire.

For use with 40 to 60 LED light engines. Designed to prevent birds from landing or setting up a nest on the luminaire.

For use with 20 to 30 LED light engines. Designed to prevent birds from landing or setting up a nest on the luminaire.

For use with 100 to 120 LED light engines. Designed to prevent birds from landing or setting up a nest on the luminaire.

Designed to prevent birds from landing or setting up a nest on the luminaire.

Designed to prevent birds from landing or setting up a nest on the luminaire.

Extended L-Shaped Surface Bracket (for use with Adjustable Arm & Horizontal/Vertical Tenon Mounts)

L-Shaped Surface Bracket (for use with Adjustable Arm & Horizontal/Vertical Tenon Mounts)

Extended Horizontal Surface Bracket (for use with Adjustable Arm & Horizontal/Vertical Tenon Mounts)

Horizontal Surface Bracket (for use with Adjustable Arm & Horizontal/Vertical Tenon Mounts)

Designed to prevent birds from landing or setting up a nest on the luminaire.

Must specify finish color. Not available with JB mount.

Round Steel Poles

For use with Hook & Cord Mounts. Steady Lock for eyebolt.

Twin – Mid-Pole Mounting Bracket (for use with Adjustable Arm & Horizontal/Vertical Tenon Mount). NOTE: Not for use with the Cree Edge™ High Output Area/Flood luminaires.

Single – Mid-Pole Mounting Bracket (for use with Adjustable Arm & Horizontal/Vertical Tenon Mount). NOTE: Not for use with the Cree Edge™ High Output Area/Flood luminaires.

90-degree Quad – Round External Mount Horizontal Tenons (for use with Adjustable Arm Mount). NOTE: Not for use with the Cree Edge™ High Output Area/Flood luminaires.

90-degree Triple – Round External Mount Horizontal Tenons (for use with Horizontal Tenon Mount). NOTE: Not for use with the The Edge® High Output Area/Flood luminaires.

90-degree Triple – Round External Mount Horizontal Tenons (for use with Adjustable Arm Mount). NOTE: Not for use with the Cree Edge™ High Output Area/Flood luminaires.

120-degree Triple – Round External Mount Horizontal Tenons (for use with Adjustable Arm Mount). NOTE: Not for use with the Cree Edge™ High Output Area/Flood luminaires.

90-degree Twin – Round External Mount Horizontal Tenons (for use with Horizontal Tenon Mount). NOTE: Not for use with the The Edge® High Output Area/Flood luminaires.

180-degree Twin – Round External Mount Horizontal Tenons (for use with Horizontal Tenon Mount). NOTE: Not for use with the The Edge® High Output Area/Flood luminaires.

90-degree Twin – Round External Mount Horizontal Tenons (for use with Adjustable Arm Mount). NOTE: Not for use with the Cree Edge™ High Output Area/Flood luminaires.

180-degree Twin – Round External Mount Horizontal Tenons (for use with Adjustable Arm Mount). NOTE: Not for use with the Cree Edge™ High Output Area/Flood luminaires.

Single – Round External Mount Horizontal Tenons (for use with Horizontal Tenon Mount). NOTE: Not for use with the The Edge® High Output Area/Flood luminaires.

Single – Round External Mount Horizontal Tenons (for use with Adjustable Arm Mount). NOTE: Not for use with the Cree Edge™ High Output Area/Flood luminaires.